Friday, September 2, 2011

Recycling Center

I am so proud of my recycling center.  I found the plans at (where else?) ana-white.com where it is used as a laundry basket dresser.


It's made of four peices of plywood from the dump that I shoddily spray-painted limey green.  I am so very proud of this project because I did it all. on. my. own.  (Following directions)

This includes cutting the long L-shaped aluminum rods with a hand saw and using the drill press to drill holes into them so they could be screwed into the sides.

I installed the L-rods (or whatever they are called) for the top two baskets but decided to simply rest the bottom one on the floor.

Everything with this project went fine... until I screwed the plywood together incorrectly.  I assembled it with the sides on the inside margins of the top and bottom, rather than outside margin (as seen in photos).  I was so mad I took a week off from the project.  The following Saturday and disassembled the thing, made some more cuts, reassembled and bam! 



Recycling center.

There's just one finishing touch that needs to happen.  The sides bow outward (I left them in the sun..don't do that) so the middle shelf is very sensitive.  It falls off the L-rod easily.

To remedy this, I plan to screw a plank across the back that will pull the bowed area inward for better support.

Hooray!  We no longer have to walk across the yard to throw recyclables into various crates.

Unrelated: Marzipan and the End Table

I love my cat.  I am just that kind of person.

She found her new favorite place white I've been storing the end table in our living room until I paint the stencil on.





Poor thing.  She'll have to say goodbye to it someday...







...but that day is not today.  I have yet to paint the stencil on... it's intimidating.  Especially since I made things harder for myself in trying to "touch up" the yellow rectangles.




My friends... don't do this.  Maybe you don't even need me to tell you this and that is fantastic.  This is a picture of primer over top of blue spots on the yellow paint that I intended to paint over and make everything nice again.

Wrong.

Yellow over white is not the same shade as yellow over yellow.  So I ended up priming the both dag-gone rectangles over again and putting two coats of yellow paint overtop. Again.


She knows when I do something dumb, doesn't she?

Monday, August 29, 2011

Wood Filler Mini-Tutorial

I love wood filler.  I hate holes, so I love wood filler.  It's so easy to use and after the furniture is painted, you can't even tell there was ever a hole there.  Would you like to share in my bliss?

Since my father and I recycle old wood for projects, the wood can come with nail holes and any number of "defects" (put in quotes because sometimes I like the character those "defects" give).  How we fill the holes depends on the finish for the peice.
Stain = no wood filler. 
Paint = yes wood filler.

The bedside table I've been working on has quite a few holes that have needed patching.  For once I remembered to take progressive pictures for you!  I decided I'd give you a run-down on wood filler.

Here we have pretty little bedside drawer.


It is pretty sturdily put together, not just with screws but with notches as well.  Just the same, I would rather the screw holes not show up in the finished product, especially those in front. (Can you spot them on either side of the front?)

So I grab the Elmer's wood filler to start patching things up.


Just take a little peice and start pushing it into the hole.  Make sure you cover the entire hole, putting a little extra around the edges. 


You also want to leave a small mound because it tends to shrink as it dries.

The amount of drying time depends on the size of the hole.  Small holes like these probably take about 15 minutes for drying, while larger ones can take an hour or more.  The directions on the side of the box have more advice about that.  I've left it for days, actually, because I haven't had time to get back to it.

After the filler dries, you simply sand the area so it's even with the rest of the wood.  Bam! No more hole.

Prime the project like normal and you're good to go.

If you're like me and eager to get the thing done, you may notice after a coat of primer that you missed some holes.



No worries here!  Simply repeat the same process- filling, drying, sanding.




Then give it another coat of primer and take you out of the oven 'cuz you're done!
Hope some of you found this as useful as I did.  You can also use wood filler for peices that you're refinishing, not building from scratch.

Remember- don't use wood filler if you are going to use wood stain!  It is for paint only.

Hooray for holelessness!

Wednesday, August 3, 2011

Bedside Table Progress

So I've been working on the bedside table from ana-white.com with the help of my master carpenter father.  I am sure I could go to Lowes and buy the wood and get it cut and follow Ana White's steps and be okay, but we have a field full of free wood.  The challenge is that I have to do the planing and cutting and glueing to make peices I would otherwise buy.  BUT.  The would we have is free.  There is a steady supply as my husbo keeps taking down old houses.  I am recycling wood (hooray!).  There is a story to the wood and I know where it's from.

So I am learning the skills needed to take on these preparation steps before I can follow Ana White's steps.

Anyhallyhoo I remembered to take a *few* pictures of where I am in the process of building this table.  I even took a few for a mini wood-filler tutorial (super duper stinkin' easy).

Here is the current state of the bedside table:


Sorry about the mess.. I've been working in Greer's shop to protect the beaut from pesky bugs that get stuck in wet paint.  This is all put together and primed, waiting for me to select the color to paint (most likely...white).  The lines you see towards the top of the table are notches for the table top to fit in.  It will make sense later.

The drawer is together, but waiting to be sanded and primed.  I still have some wood filler on it to sand off, but here's what it looks like now:


This entire table is made of pine from an old house my husband has been taking down.  The back of the drawer is cedar to add that lovely smell.  The bottom of the drawer is masonite because it's light, strong and we had some lying around.  Otherwise we would have used some spare plywood.

What's new in your lives?

Participating in:
Good Life Wednesdays

Thursday, July 28, 2011

Hutch has DOORS!

I can't even remember if I told you about this hutch base I've been working on with my dad, but we finally got the doors on it.



This makes me so happy because it hides *some* of the DVD clutter.  There's still a lot on top, but we have no choice.  Check out what the doors are hiding..



Ahh too many DVDs!!!  The long boards standing between the hutch and plant are the shelves for inside the cabinet.  We're waiting for the hardware to arrive then we'll place those in for a little more organization and easy access.

I love the black walnut wood we used.  It's so rich and delicious looking.  The knobs I found at a local hardware store and I love the vine pattern on them.



Fingers crossed I remember to take pictures during the shelf installation so I can a least show some part of the process!

The Dorothy Dollhouse- FINISHED!

I've done it! I've finally done it!

I finished that "simple" Greenleaf Dollhouse (The Arthur) that my mom has had since, oh, the 70's.  If you have spoken with me about it, you know that it has been the biggest pain in my patootie.  I mean, I've had fun picking out colors, wallpapers, etc., but when it comes to the whole "insert tab into slot and BAM! You have a dollhouse"- that is baloney.  Sheer lies.

Here we have the painted exterior (pink) with interior walls wallpapered.  In the bottom left you can see the start of my many attempts to get some sort of skeleton put together. With plenty of help from Marzipan.


There is so much wood glue and hot glue on the Dorothy Dollhouse that it better stay together.  Oh, did I mention I also used right-angle brackets to hold the base together with welding glue?  Slot-Tab design my foot.



 I've learned a lot in this process. 

I should mention I made it for my 18-month-old neice, but she's a bit too young for it.  That's gives me plenty of time to get some interior peices for it.

I tried so many different ways to keep the dang walls together at the start.  I had it balanced perfectly, propped up with the fan blowing to dry the glue, then crash.  I'd hear it from the living room.  My hard work falling to peices (again).

Finally,  I got the main walls secured (somehow).



And next were the additional walls and roof peices.



Oh, by the way... this was all in February.  I finished it in mid-May.  Why?  I got so frustrated I took a break from it around mid-March.  The smile up there... very fake.

And with the roof (minus shingles):




That brings us to April, the month the Dorothy Dollhouse got its name.  You may remember I mentioned a tornado that bizarrely swept through our yard at 2:00am?  I have not posted about it.. just don't really feel like it. 

Surrounded by pillows in tiny bathroom during storm.

But on that horrifying night, my studio window was evvver so slightly open (less than an inch).  The dollhouse was facing open side to that tiny little opening.  Since the tornado caused the rain to swirl, it came in horizontally.  I discovered this the next evening when I noticed the window.  I checked the dollhouse to find all my wallpaper and flooring were no longer flat, but wavy.  But luckily, that was the only damage!  It's relatively ignorable (word?), so I chalked it up to a story and named it the Dorothy Dollhouse (...Wizard of Oz).

I took the wood glue back up in May and started attaching the decorations and shingles. Shingles take forever!  I tried to be as neat as possible, but I know deep down it probably looks sloppy.  As Greer says, it's "perfectly imperfect."  He's such a sweetheart.




See the wavy wallpaper?  Ah, well.  I'm not re-doing it.  I purchased a little Hoosier cabinet and chairs, but I'm afraid the chairs may be too big.  I had fun added a mini mailbox and mini portrait.  Why are miniature things so fun??

I had some fun taking pictures.

I'm Still Alive!

Hello friends! I'm so sorry for the large chunk of time since I last posted... that's called grad school.  I had three 6-week classes that took over my life during June/July.  I have a little break now and don't you doubt I have been spending each day on projects!

I have a update for the lovely little end table you last saw primed white.  Here's that baby now...


I would say she turned out well.. but she's not done yet.  I'm going to add a stencil to the bottom square.  That's on the to-do list.

Did you need another view? Okay.



Get excited for the stencil addition (and tutorial if I remember to take pictures during the process.)

I'm participating in Metamorphosis Mondays at Between Naps on the Porch!